CH·IV International's core services for satellite and peakshaving facilities are focused on client satisfaction. As an experienced consulting company specializing in LNG, CH·IV International is in a uniquie position to provide the value of process modeling technology to the Peak Shaving Industry with "the neutral unbiased process truth".


SMALL SCALE & PEAKSHAVING FACILITIES SERVICES

Typical support services that CH·IV can provide include the following:

  • Acting Regulatory Engineer
  • Review & Oversight of all design and operation aspects
  • EPC Scope of Work
  • RFP Bid Packages
  • Procedures and Manuals
  • Design Calculations
  • Project Specifications
  • Cold Box Optimizaion Program (CBOP)*

*The Cold Box Optimization Program can be used to predict the performance of your plant and in turn increase LNG production, reduce fuel consumption, minimize risk of pipeline surcharges due to extended liquefaction season and feed forward monitoring.

Spring Gardens LNG Peakshaving Facility
CLIENT:
Baltimore Gas & Electric
PROJECT:
Spring Gardens LNG Peakshaving Facility
LOCATION:
USA, Maryland
SCOPE:
Providing on-site engineering support ranging from oversight of cold box replacement start-up, operating procedure updating, hazard mitigation studies and hazard exclusion zone calculations.
Natural Gas Liquefier Feasibility Study
CLIENT:
Confidential
PROJECT:
Natural Gas Liquefier Feasibility Study
LOCATION:
USA, New England
SCOPE:
Study to evaluate a series of options to replace total historical LNG peakshaving liquefaction capacity at four different locations. The study considered a variety of liquefaction capacities, liquefaction technologies and electric or gas turbine drive. The study also considered siting criteria, permitting limitations and LNG trucking access. Capital and operations and maintenance cost estimates were generated for 16 different cases.
Thorold LNG Production and Truck-Out Facility
CLIENT:
Northeast Midstream of Toronto
PROJECT:
Thorold LNG Production and Truck-Out Facility
LOCATION:
Canada, Thorold, Ontario
SCOPE:
Preliminary diligence to be used to assist the client to market the project to new equity investors and refine their views on the high level technical risks of the project. The project is a greenfield 180,000 gallon per day LNG production storage and truck-out facility.
Waterbury LNG Facility
CLIENT:
State of Connecticut
PROJECT:
Waterbury LNG Facility
LOCATION:
USA, Central Connecticut
SCOPE:
Engineering services to assure regulatory compliance. This included review and oversight of the design, safety and operational aspects of the facility, encompassing: RFP bid packages, EPC scope of work, design calculations, detailed drawings, procedures and manuals, project specifications and construction.